But here seems to be no drivers for windows 7. This selection is urgent, when installing windows. Posted on Jul 08, Be the first to answer. Well, I had exactly the same problem. Answered on Jan 02,

Uploader: Zulutilar
Date Added: 19 April 2013
File Size: 57.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 68189
Price: Free* [*Free Regsitration Required]

Answered on Jul 10, You need to setup the bios boot settings, in order to boot from the drive.

Other selections maybe needed, depending on the bios version. I then saved and went out and my motherboard has been working fine since then. When the screen pops up select to install windows and Format the hard drive. So this is what I tried; I move the jumper to pins 3 and 4, pressed power a few times although I don’t think that is necessaryand after about 30 seconds I moved the jumper back to pins 1 and 2.

Answered on Oct 09, Recent Popular Answered Unanswered. Answered on May 12, Answer questions, earn points and help others Answer questions. Answered on Nov 23, I hope this helps. On first start up I got a message, something to the effect of “CMOS checksum error”, but I was then able to go into the bios reset defaults.


Well, I had exactly the same problem. But here seems to be no drivers for windows 7.

That is the easiest way to do it. A large ide drive, is hard to find, but a sata drive does come up to 3 tb. Answered on Jan 02, The sata drive, should be shown in the bios main meny, when entering the bios.

Answered on Dec 14, Answered on Mar 13, Not finding what you are looking for?

EliteGroup Computer Systems P4M800-M7, LGA 775/Socket T, Intel (P4M800-M7(3.1)) Motherboard

Answered on Feb 14, Answered on Feb 26, Hope this helps someone who has a similar issue. And you can find that driver HERE. This is version 1,0 http: First boot device dvd drive, and second the harddrive. Here is only drivers for vista and xp, and there is absolutely no guaranty, the drivers will work on windows 7.

I was convinced that the motherboard was faulty.

P4MM7 V | P4MM7 LGA Sata DDR MBoard

Moving the jumper to pins 3 and 4 puts the motherboard in clear CMOS memory mode. Ok there are 2 versions I will post the drivers for those 2 versions.


It probably isn’t powered, try to search your motherboard map I got one with all other manuals and safety instructions and carefully try to elitegroyp all cables.

Then I thought of trying the following that helped: P48m00 xp, supports up to 2 tb, with the latest service pack installed. Check if your fan is moving when you power on your computer.